Configuring default gateway

Add default gateways for DSG

When you install the DSG, to route network traffic, you can add an individual default gateway to the network interfaces in the same network using either the Static IP mode or the DHCP server. Mapping unique default gateways ensures requests intended for the required IP are routed through the default gateway assigned to that IP address.

Configure default gateway for management NIC

Configure the default gateway for the management NIC (ethMNG) using the DSG CLI manager:

  1. On the DSG CLI Manager, navigate to Networking > Network Settings.

  2. On the Network Configuration Information screen, press Tab to select Interfaces and press Enter.

  3. Press Tab to select ethMNG and press Enter to add a default gateway.

  4. Press Tab to select Gateway and press Enter.

  5. Enter the Gateway IP address.

  6. Press Tab to select Apply and press Enter.

Configure default gateway for service NIC

Configure the default gateway for the service NIC (ethSRV0) using the DSG CLI manager.

  1. On the DSG CLI Manager, navigate to Networking > Network Settings.

  2. In the Network Configuration Information screen, press Tab to select Interfaces and press Enter.

  3. Press Tab to select ethSRV0 and press Enter to add a default gateway.

  4. Press Tab to select Gateway and press Enter.

  5. Enter the Gateway IP address.

  6. Press Tab to select Apply and press Enter.

Last modified February 7, 2025