DSG 4.0.1 is a Tech Preview build intended only for POC/testing environments and must not be used in production environments.

Important:

  • Upgrade from DSG 4.0.1 to any future releases is not supported.
  • Back up your system before upgrading to DSG 4.0.1.

Installing the DSG patch on ESA

Installing the DSG patch on ESA

Steps to install the DSG patch on the ESA to extend its Web UI with the DSG menu.

  1. Login to the ESA Web UI.

  2. Navigate to Settings > System > File Upload.

  3. Click Choose File to upload the DSG patch ESA_PAP-ALL-64_x86-64_10.2.0.xxxx.DSGUP.4.0.0.x.pty file.

  4. Select the file and click Upload.

    The uploaded patch appears on the Web UI.

  5. On the ESA CLI Manager, navigate to Administration > Installation and Patches > Patch Management.

  6. Enter the root password.

  7. Select Install a Patch and press OK.

  8. Select the uploaded patch.

  9. Select Install.

    The patch is successfully installed.

After the DSG patch is installed, the DSG component is visible on the ESA Web UI. The details of the DSG component can be verified from the About screen on the ESA. To verify the DSG installation, run the following steps.

  1. Login to the ESA Web UI.
  2. Click the (Information) icon, and then click About.
  3. Verify that the DSG version is reflected as DSG 4.0.0.

. Login to the ESA Web UI.

  1. Navigate to Settings > System > File Upload.

  2. Click Choose File to upload the DSG patch ESA_PAP-ALL-64_x86-64_10.2.1+HF.xxxx.DSGUP.4.0.1.x.pty file.

  3. Select the file and click Upload.

    The uploaded patch appears on the Web UI.

  4. On the ESA CLI Manager, navigate to Administration > Installation and Patches > Patch Management.

  5. Enter the root password.

  6. Select Install a Patch and press OK.

  7. Select the uploaded patch.

  8. Select Install.

    The patch is successfully installed.

After the DSG patch is installed, the DSG component is visible on the ESA Web UI. The details of the DSG component can be verified from the About screen on the ESA. To verify the DSG installation, run the following steps.

  1. Login to the ESA Web UI.
  2. Click the (Information) icon, and then click About.
  3. Verify that the DSG version is reflected as DSG 4.0.1.

Last modified : June 12, 2026