Installing the RPAgent

Before you begin:

Before proceeding with the RPA installation in secure mode, ensure that the required CA certificate is available and trusted on the system.

• For ESA

  Download the certificate from ESA.

  For more information about downloading certificates from ESA, refer to Manage Certificates.

After obtaining the certificate, configure the system environment variable:

Ensure the ESA hostname or IP is present in the ESA TLS certificate (SAN or CN) and it is resolvable from the RPAgent host.

After the CA certificate is available, proceed with the RPA installation.

To install the RPAgent:

1. Navigate to the directory containing the installation files.

2. To install the RPAgent, double-click the RPAgentSetup_Windows_x64_<version>.exe file.

   The Welcome to Resilient Package Agent Setup Wizard dialog box appears.

3. Click Next.

   The Upstream Connectivity Information dialog box appears.

4. In the Address box, enter the host name or the IP address of the ESA.

   Caution: Ensure that the ESA is up and running with the HubController service. The HubController service must be in the Running state to enable automatic download of certificates.

5. In the Port box, type the ESA port number.

   Note: The default port for ESA is 8443.

6. In the Certificate Download User box, type the ESA username.

7. In the Certificate Download Password box, type the ESA password.

8. Click Next.

   The Select Destination Location dialog box appears.

9. To change the default installation directory for the RPAgent:

   1. Click Browse.

   2. Select the required installation directory to install the RPAgent.

   3. Click OK.

   Note: The default directory is C:\Program Files\Protegrity\rpagent where the RPAgent is installed.

10. Click Next.

    The Ready to Install dialog box appears.

11. Click Install.

    The installer completes the installation and the Completing the Protegrity RPAgent Setup Wizard dialog box appears.

12. To exit the wizard, click Finish.

13. To check the Protegrity RPAgent service status, navigate to Start > Control Panel > System and Security > Administrative Tools > Services. The Services window appears.

14. Verify that the Protegrity RPAgent service is in the Running state.